Starting nest for small species
Mini-nest with hinged upper outworld, lid with ventilation hole filled with a fine stainless steel mesh. In the lower part there is an irrigation system with replenishment in the back of the nest. No glue, silicone or chemicals were used during production. The nest will stay irrigated for up to 3 weeks depending on the room temperature. Temnothorax crassispinus lasts for up to 4 weeks at about 20 ° C per irrigation, but it is a very resistant species. The exit hole is 3.5 mm in size. The nest is suitable for species such as Temnothorax, Myrmica, Solenopsis fugax, Leptothorax, Ponera coarctata, Tetramorium cf. caespitum, Pheidole cf. pallidula and other smaller European Myrmicinae.
Dimensions of the arena (nest and outworld have a slightly conical shape):
- Width: 57 mm at the widest part
- Height: 37 mm
- Depth: 36 mm at the widest part
Nest dimensions:
- Width: 57 mm at the widest part
- Height: 37 mm
- Depth: 36 mm at the widest part
Total weight:
- approximately 180 g (dry, without water)
Comments (0)
Mini-nest with hinged upper outworld, lid with ventilation hole filled with a fine stainless steel mesh. In the lower part there is an irrigation system with replenishment in the back of the nest. No glue, silicone or chemicals were used during production. The nest will stay irrigated for up to 3 weeks depending on the room temperature. Temnothorax crassispinus lasts for up to 4 weeks at about 20 ° C per irrigation, but it is a very resistant species. The exit hole is 3.5 mm in size. The nest is suitable for species such as Temnothorax, Myrmica, Solenopsis fugax, Leptothorax, Ponera coarctata, Tetramorium cf. caespitum, Pheidole cf. pallidula and other smaller European Myrmicinae.